the abc201 series of open - frame power supplies, with its wide universal 90 - 264 vac input range and high power density, is available at 200 w of output power and a variety of single output voltages. the high efficiency and high power density of the abc fam ily ensures minimal power loss in end - use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally - friendly end products. these power supplies are ideal for telecom, datacom, industr ial equipment and other applications. ? 5 x 3 x 1. 5 inch form f actor ? 200 w with forced - air cooling ? high efficiency > 88% ? 12 v fan & 5 v standby outputs ? remote sense ? output voltage a djustability ? iec protection class options: ? class i: earthing tab j4 (no suffix) ? class ii: no earthing tab ( - 2 suffix) ? rohs compliant ? ce marked ? instrumentation ? lighting ? industrial applications ? applied computing ? renewable energy ? test and measurement ? robotics ? wireless communication
2 abc201 series tech.support@psbel.com model 1 connector output voltage max load convection 2 max load 300 lfm 2, 3 , 4 minimum load ripple & noise 5 abc 201 - 1005g jst 5.0 vdc 26.0 a 26.0 a 0 .0 a 1% abc 201 - 1t05g screw terminal 5.0 vdc 26.0 a 35.0 a 0.0 a 1% abc 201 - 1012g jst 12 vdc 13.33 a 16.67 a 0.0 a 1% abc 201 - 1t12g screw terminal 12 13.33 a 16.67 a 0.0 a 1% abc 201 - 1015g jst 15 10.66 a 13.33 a 0.0 a 1% abc 201 - 1t15g screw terminal 15 10.66 a 13.33 a 0.0 a 1% abc 201 - 1024g jst 24 6.66 a 8.33 a 0.0 a 1% abc 201 - 1t24g screw terminal 24 6.66 a 8.33 a 0.0 a 1% abc 201 - 1030g jst 30 5.33 a 6.66 a 0.0 a 1% abc 201 - 1t30g screw terminal 30 5.33 a 6.66 a 0.0 a 1% abc 201 - 1048g jst 48 3.33 a 4.17 a 0.0 a 1% abc 201 - 1t48g screw terminal 48 3.33 a 4.17 a 0.0 a 1% cover - 201 - xbc 6 metal cover kit accessory specifications are for nominal input voltage, 25c unless otherwise stated. parameter description / condition specification input voltage universal 90 - 264 vac / 120 - 390 vdc input frequency 47 to 63 hz input current 120 vac: 230 vac: 2.4 a max. 1.2 a max. inrush current 120 vac: 230 vac: 35 a max. 65 a max. leakage current 120 vac: 230 vac: < 150 a < 300 a power factor 120 vac: 230 vac: 0.99 0.95 switching frequency pfc converter (variable) resonant converter (variable) 35 to 250 khz, 90 khz typical 35 to 250 khz, 90 khz typical 1 for class ii (without input earth pin) add suffix - 2 (e.g.: abc201 - 1012g - 2). 2 combined output power from v1, vstby and vfan should not exceed the total output power rating. 3 fan output voltage tolerance is +/ - 20%. during v1 full load, vfan needs min. 20 ma load to be within regulation band. 4 peak current for fan output is 1 a. 5 ripple is 2% up to 20% load and < 1% above 20% load. ripple is peak to peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0.1 f capacitor at rated line voltage and load ranges. 6 when used in cover kit, de - rate output power to 70 % under all operating conditions.
abc201 series 3 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00284_ae parameter description / condition specification efficiency 120 vac: 230 vac: 84% typical 86% typical hold up time 120 / 230 vac 10 ms output power derate output power linearly to 80% from 90 v to 80 vac input. peak power: 250 w for 0.2 s 160 w to 200 w line regulation +/ - 0.5% load regulation +/ - 2.0% transient response main output 50 to 100% load change, 50 hz, 50% duty cycle, 0.1a / s < 10%, recovery time < 5 ms rise time < 100 ms set point accuracy 1% voltage adjustment v1 3 % over voltage protection v1 only 110 to 150 % over current protection 110% typical above rating short circuit protection short term, auto recovery parameter description / condition specification operating temperature refer to derating curve ( figure 1 ) start - up is guaranteed - 20 to 70c - 20 to 0c storage temperature - 40 to 70 c cooling 5 v model convection: 300 lfm: 130 w 175 w other models convection: 300 lfm: 160 w 200 w humidity non condensing 95% altitude operating: non - operating: 10,000 ft. 40,000 ft. reliability mtbf according to telcordia C sr332 - issue 3 1.6 million hours conducted emissions en55032 - b, cispr22 - b, fcc part15 - b pass radiated emissions en 55032 a; with external core (king core k5b rc 25x12x15 - m in input cable) pass level b input current harmonics en 61000 - 3 - 2 class d voltage fluctuation and flicker en 61000 - 3 - 3 pass esd immunity en 61000 - 4 - 2 level 3, criterion a radiated field immunity en 61000 - 4 - 3 level 3, criterion a electrical fast transient immunity en 61000 - 4 - 4 level 3, criterion a surge immunity en 61000 - 4 - 5 level 3, criterion a conducted immunity en 61000 - 4 - 6 level 3, criterion a magnetic field immunity en 61000 - 4 - 8 level 3, criterion a voltage dips, interruptions en 61000 - 4 - 11 criterion a & b
4 abc201 series tech.support@psbel.com parameter description / condition specification isolation voltage input to output: min. vdc safety standards approved to the latest edition of the following standards: csa/ul60950 - 1, en60950 - 1 and iec60950 - 1 agency approvals nemko, ul, c - ul ce mark complies with lvd directive parameter description / condition power good signal ttl signal goes high after main output is in regulation band. delay is 0.1 to 0.3 sec. power fail signal ttl signal goes low 1 ms advance before output goes out of regulation due to mains failure remote on / off to turn - on power supply short j3 pin 4 to pin 6 (psu is shipped in this configuration) remote sense compensates for 200 mv cable drop connector pin description / condition manufacturer / pn ac input connector j1 pin 1 pin 2 ac neutral ac line molex: 26 - 60 - 4030 or equivalent; mating: 09 - 50 - 3031; pins: 08 - 50 - 0106 dc output connector j2 pin 1,2,3 pin 4,5,6 rtn vout option 1: tyco: 2 - 1776112 - 3 or equivalent mating: 13 awg wire option 2: jst: b6p - vh - b (lf) (sn) or b6p - vh (lf) (sn) or equivalent mating: vhr - 6m; pins: svh - 41t - p1.1 signals & aux power 7 j3 pin 1 pin 2 pin 3 pin 4 pin 5 pin 6 pin 7 pin 8 +ve remote sense vfan (+12 v/0.5 a) - ve remote sense remote on/off vstby (+5 v/1 a, +/ - 5%) rtn (signal) power fail power good molex: 22 - 23 - 2081 or equivalent mating: 22 - 01 - 2087, pins: 08 - 50 - 0113 earthing tab j4 molex: 19705 - 4301 or equivalent mating: 190030001 parameter description / condition weight 325 g (0.72 lbs.) dimensions 127.0 x 76.2 x 38.1 mm (5 x 3 x 1.5 inch) cooling convection: 83 w; 300 lfm: 175 w (5 v model) convection: 160 w; 300 lfm: 200 w (other models) 7 psu is supplied with j3 housing, pin - 4 and pin - 6 shorted to enable main output without remote on/off feature.
abc201 series 5 asia - pacific +86 755 298 85888 europe, middle east +353 61 225 977 north america +1 408 785 5200 ? 201 7 bel power solutions & protection bcd.00284_ae convection load: 83 w up to 40 c de - rate above 40 c @ 1.89% per c forced air cooled load: 130 w up to 50c (for screw terminal version) de - rate above 50 c @ 1.63% per c forced air cooled load: 175 w up to 50c (for jst connector version) de - rate above 50 c @ 2.5% per c convection load: 160 w up to 40 c de - rate above 40 c @ 2% per c forced air cooled load : 200 w up to 50c de - rate above 50 c @ 2.5% per c figure 1. derating curve s
6 abc201 series tech.support@psbel.com figure 2 - mechanical drawing notes: in case the pcb is mounted in a metal enclosure, using metal hardware ensure the following : 1 stand off, used to mount pcb has od of 5.4 mm max. 2 screws, used to fix pcb on stand off, have head dia of 6.0 mm max. 3 washer, if u sed, to have dia of 6.5 mm max. nuclear and medical applications - products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. specifications are subject to change without notice.
|
